10s Battery Balancer Kit – MegaBalancer
This device is perfect for balancing 1s to 10s packs. It will individually charge the cells through the balancing leads until it reaches 4.2V. This device is available as a kit containing the PCB + DC to DC isolated power supplies and TP4056 charging modules.
€ 167,00 – € 194,00
Description
This device is perfect for balancing 1s to 10s packs. It will individually charge the cells through the balancing leads until it reaches 4.2V. This device is available as a kit containing the PCB + DC to DC isolated power supplies and TP4056 charging modules.
The pins and XT60 connector is not included in the package
Components:
DC/DC Converter:
Environmental conditions:
Operating temperature – 40~+85℃
Storage temperature – 40~+125℃
Relative humidity – 5~95%RH
Cooling method – Natural cooling
Atmospheric pressure – 80~160Kpa
Altitude – ≤2000m
Vibration – Vibration coefficient 10~500Hz, 2G10min./1cycle60min.each along X,Y,Z axes.
Meet the requirements of secondary road transportation
Input characteristics (normal temperature test)
Rated input voltage – 12VDC nominal input series
Input voltage range – 9~18VDC
Maximum input current – ≤0.7A
Reflected ripple current – –
Impulse voltage(Isec.max)– -0.7~30VDC
Starting voltage – 9VDC(MAX)
Start Time(Typ.) – 100mS(Nominal input voltage and constant resistance load)
Input filter type – PI type
Hot swap – not support
Output characteristics
The output voltage – 5.0VDC
Output current – 1000mA
Output ripple and noise(mVp-p) – ≤100mV
Maximum capacitive load – 2200μF
[email protected] Load – 76/78%(Min/Tpy)
Linear adjustment rate – ±0.2 %(Tpy)
Load Regulation – ±0.5 %(Tpy)
Output overcurrent protection – 110-200% of output maximum load
Output short circuit protection – Automatic recovery after the short circuit is removed, without damaging the host
TP4056 Lithium Cell Battery Circuit Board Charging Module:
Model Number: HW-168
Type: Lithium battery charger module
Place of Origin: Guangdong, China
Brand Name: HW
Applications: Lithium battery charger module
Chip: TP4056
Input voltage: 4.5V-5.5V
Full charge voltage: 4.2V
Charging indication: Red light charging Green light full charge
Input interface: MINI USB
Operating temperature: -10℃ to +85℃
Can reverse: NO
Weight: 2.3g
Peripheral size: 25*19*6mm
Additional information
Weight | 0.250 kg |
---|---|
Package Type | Components Kit, Assembled |
Reviews
There are no reviews yet.